Skip to content 
Tap Repairs & Replacement
Tap Maintenance in the Midwest and Geraldton
A dripping tap is easy to ignore, until it starts costing you in wasted water, staining sinks or damaging cabinetry. Loose handles, noisy pipes and inconsistent flow are also signs your tapware needs attention. Geraldton Plumbing provides tap maintenance across Geraldton and surrounding areas, with practical repairs and tidy replacements that suit your home and budget.
Tap issues are often caused by worn washers, cartridges, seals or damaged seats inside the tap body. Fixing them early can prevent bigger problems like water damage under sinks, leaking vanity cupboards and avoidable pressure strain on your plumbing.
Common Tap Problems We Fix
Tapware can fail slowly over time or suddenly after a pressure change. We can help with:
- Dripping taps that will not stop
- Taps that are hard to turn on or off
- Loose or wobbly tap handles
- Noisy taps or pipe rattling when the tap is used
- Low flow at one fixture
- Leaks under the sink around flexi hoses or connections
- Mixer taps that will not hold temperature properly
If you are unsure what is causing the issue, we will inspect the tapware and the connections
then recommend the most practical fix.
Tap repairs and tap replacements
Many tap problems can be repaired without replacing the whole fixture, especially if the tap body is still in good condition. If the tapware is older, corroded or no longer worth repairing, replacement can be the smarter option.
We can assist with:
- Replacing washers, cartridges and seals
- Repairing leaking spindles and worn components
- Fixing mixer tap issues
- Replacing taps and mixers with new fixtures you supply
- Supplying and installing suitable tapware options if needed
- Checking connections and tightening or replacing flexi hoses
We aim for a clean finish and smooth operation, with no drips and no surprises.
Water pressure and why it matters
High water pressure can shorten the life of tapware, valves and flexible hoses. If you have repeated tap leaks, frequent washer failures or banging pipes, pressure could be part of the problem.
Geraldton Plumbing can check your water pressure and explain whether it is within a safe range. If pressure control is needed, we will recommend the right solution for your system.
Maintenance that helps prevent leaks
Regular tap maintenance is simple, though it makes a difference. A few small checks can prevent damage and keep your fixtures working well.
We can help you stay ahead of issues by:
- Fixing drips early before they worsen
- Checking under sink connections for slow leaks
- Replacing worn flexi hoses before they fail
- Inspecting older tapware that is becoming stiff or noisy
If you are renovating or upgrading fixtures, we can also advise on tap placement and usability so your new setup works well long term.
Tap maintenance FAQs
Why does my tap keep dripping after it has been repaired?
This can happen when the wrong cartridge is installed, the tap seat is worn or there is debris affecting the seal. We can inspect and correct the underlying cause.
Can you replace tapware that we have already purchased?
Yes. If you have chosen your own taps or mixers, we can install them and make sure the connections are correct and leak free.
Is a small drip really a problem?
Yes. Even a slow drip can waste a surprising amount of water over time and it can damage cabinetry or bench tops if it is leaking under the sink.
Call Craig and the team for tap maintenance in the Midwest and Geraldton Region
If you have a dripping tap, loose handle or leaking connection, call Craig and the team at Geraldton Plumbing. We provide tap maintenance and tap repairs across Geraldton and surrounding areas with professional service and practical advice.